-
lubricating oil filter element 2-5685-0154-99
The lubricating oil filter element 2-5685-0154-99 is a filtering accessory of the small turbine system. The function of the lubricating system is to continuously deliver a sufficient amount of clean oil with appropriate temperature to the friction surfaces of all transmission components during engine operation, thereby forming a lubricating oil film. Not only can it effectively alleviate the friction of parts, but it can also reduce power loss, reduce friction, lower temperature, ensure the service life of the engine, and provide a good working state.
Brand: YOYIK -
Regeneration device anion filter AZ3E303-05D01V/-W
The regeneration device anion filter AZ3E303-05D01V/-W of the regeneration device is a resin filter element, which is a porous insoluble exchange material. Good materials determine excellent performance. The filter element has good adsorption of organic matter, which can decolorize, clarify, and transparent the filtered liquid. It can filter particles, impurities, and remove water. The working principle of this filter element is to separate water from oil through ion exchange.
Brand: YOYIK -
EH oil pump discharge filter AP1E101-01D03V/-WF
The EH oil pump discharge filter AP1E101-01D03V/-WF is installed at the outlet of the oil pump in the turbine control oil system to filter impurities in the turbine oil and maintain its cleanliness. The quality of steam turbine oil has many indicators, mainly including viscosity, acid value, acid-base reaction, resistance to emulsification, and flash point. In addition, transparency, freezing point temperature, and mechanical impurities are also criteria for determining oil quality.
Brand: YOYIK -
Actuator inlet oil filter AP6E602-01D10V/-W
The actuator inlet oil filter AP6E602-01D10V/-W is a high-precision hydraulic oil filter element suitable for filtering the hydraulic oil in the turbine fire resistant fuel control system. It is used to filter out impurities that enter the fire resistant fuel of the hydraulic engine, including excessive mechanical impurities and oil sludge pollution.
Brand: YOYIK -
Steam turbine actuator oil filter DL004001
The steam turbine actuator oil filter DL004001 is installed on the integrated block of the turbine high control valve hydraulic servomotor, used to filter out the solid particles and colloidal impurities of fire-resistant oil (EH oil) flowing through the hydraulic servomotor, maintain the cleanliness of the oil circuit in the system, reduce equipment wear, filter the oil entering the servo valve of the hydraulic servomotor, and protect the servo valve. This filter element can extend the service life of the equipment in the hydraulic engine.
Brand: YOYIK -
Oil pump discharge flushing oil filter DP602EA01V/-F
The oil pump discharge flushing oil filter DP602EA01V/-F is generally used in conjunction with the working filter element when used in the fire resistant oil pump. First, the flushing oil filter DP602EA01V/-F is used to clean and filter impurities in the system before using the working filter element. This not only maintains the cleanliness of the fire resistant oil, but also reduces the wear and tear of impurities on the equipment in the system.
Brand: YOYIK -
Regeneration device cation filter PA810-001D
The regeneration device cation filter PA810-001D of the regeneration device is applied in the power industry, mainly used for acid removal in the turbine fire resistant oil system, and has achieved good results in reducing the acid value of the fire resistant oil and improving the electrical resistivity of the oil.
Brand: YOYIK -
Circulating oil pump oil-return working filter DP405EA03V/-W
The Circulating oil pump oil-return working filter DP405EA03V/-W is used to protect specific components in the fuel supply device of the fire resistant fuel system. It is usually installed in the inlet filtration of the fire resistant fuel system to filter out metal particles, pollutants, and impurities in the fluid medium, to filter out solid particles and colloidal substances in the working medium, effectively control the pollution level of the working medium, and ensure the normal operation of the components.
Brand: YOYIK -
Oil purifier filter element P2FX-BH-30X3
The Oil purifier filter element P2FX-BH-30X3 is installed in a self-sealing magnetic oil suction filter, where "BH" indicates that the medium is water ethylene glycol. The function of this filter element is to filter out solid particles and colloidal substances in water ethylene glycol, effectively controlling the pollution level of water ethylene glycol. When replacing the filter element, the self-sealing valve should be closed to prevent a large amount of oil from flowing out of the oil tank. During installation, the filter should be immersed below the medium surface. If the self-sealing valve is not fully opened, do not start the pump, otherwise it may cause suction of the pump.
Brand: YOYIK -
Lubricating oil filter element 21FC5128-160X600/25
Lubricating oil filter element 21FC5128-160X600/25, made of stainless steel metal mesh filter material, carbon steel end cover, carbon steel framework, and sturdy filter element, can be used in various oil systems to filter out solid impurities that are mixed externally or generated internally during system operation. It is mainly installed on the oil suction, pressure, return, bypass, and separate filtration systems in the system.
Brand: YOYIK -
Regeneration device ion resin filter element DZ303EA01V/-W
The regeneration device ion resin filter element DZ303EA01V/-W is a filter element used to reduce the acidity in the fire resistant oil system of steam turbine generator sets. It utilizes the principle of ion exchange to adsorb acidic substances or metal ions in the fluid, thereby reducing its acidity or increasing its resistivity.
Brand: YOYIK -
EH oil pump suction filter DS103EA100V/W
The EH oil pump suction filter DS103EA100V/W is suitable for the inlet filtration of EH fire-resistant oil main pump. The pump inlet filter element is installed in front of the EH oil station pump inlet to protect the main oil pump and prevent large particles in the oil from entering the pump body and damaging the oil pump. It is recommended to replace it twice a year. It is a high-pressure and high-precision hydraulic oil filter element that maintains the safe and efficient operation of the system.
Brand: YOYIK
/
