-
EH Oil Actuator Filter QTL-6021A
The actuator filter QTL-6021A typically consists of a housing that contains a replaceable filter element. The element is designed to trap particles and debris as the oil passes through it, ensuring that only clean oil is delivered to the actuator. Regular maintenance and replacement of the filter element is necessary to ensure that the steam turbine actuator filter continues to function effectively and protect the turbine from damage. -
Duplex oil filter element LX-FM1623H3XR
Duplex oil filter element LX-FM1623H3XR is a duplex filter element produced by YOYIK. The duplex filter refers to two housings equipped with an upper cover and a filter element inside. The upper side wall of the two housing is provided with an oil inlet and the lower side wall is provided with an oil outlet. The oil inlets on the two housings are connected by a three-way oil inlet pipe assembly with oil inlet switching valve or oil inlet switching valve core, and the oil outlets on the two housings are also connected by a three-way oil outlet pipe assembly with oil outlet switching valve or oil outlet switching valve core. -
Lubricating oil filter element LY-48/25W
The lubricating oil filter element LY-48/25W is installed in the oil filter of the lubricating oil system, and the material is 1Cr18Ni9Ti. The oil filter is installed at the pump outlet to filter the lubricating oil entering the compressor, which is an effective measure to ensure the quality of lubricating oil. In order to ensure the safe operation of the unit, two filters are configured, one for operation and one for standby. -
Jacking Oil Pump Suction Oil Filter DQ6803GA20H1.5C
The jacking oil pump filter element DQ6803GA20H1.5C is used at the oil inlet of the jacking oil pump. As an oil inlet filter element, it can filter out the oil before the pump, remove impurities and solid particles in the oil, and achieve a certain degree of cleanliness. Proper filtering before the pump can effectively prevent damage to the jacking oil pump, ensure smooth operation of the pump, and extend the service life of the oil pump.
Brand: YOYIK -
China manufacturer Honeycomb Filter SS-C05S50N
The honeycomb filter SS-C10S25 is made by winding a single wire back and forth on the support bone using a fiber harness. Because of the structural characteristics of this filter element, it has the characteristics of ideal filtration gradient, inner dense and outer sparse. The space formed by the winding of the wire can accommodate more pollutants, and the filter cartridge has a long lifespan. The material in the wire filter is single without adhesive, ensuring chemical adaptability. At present, line filtration is widely used in the pre filtration of liquids. The high-precision degreased cotton thread filter element is very effective in gas-liquid separation of air.
Brand: YOYIK -
Jacking Oil System Backwash Filter ZCL-I-450
Jacking Oil System Backwash Filter ZCL-I-450 is widely used in turbine oil system and auxiliary lubrication system, as well as thin oil circulating lubrication system of large equipment in metallurgy, mining, petrochemical, light industry, etc. In addition, the device is used as a temporary filtering device in the oil circulation stage of the steam turbine unit, which can improve the flushing quality of the oil system, shorten the oil circulation time, ensure that the unit is put into operation in advance, and create considerable social and economic benefits. -
Jacking oil pump discharge filter DQ8302GAFH3.5C
Jacking oil pump discharge filter DQ8302GAFH3.5C is used for filtering the outlet of jacking oil pump. The oil source of the jacking oil pump comes from the lubricating oil after the oil cooler, passing through 45 μM Automatic backwash filtration device for coarse filtration, and then 20 μM double-tube filter enters the oil suction port of jacking oil pump. After being boosted by the oil pump, the oil pressure at the outlet of the oil pump is 12.0MPa. The pressure oil enters the diverter through the single-tube high-pressure filter, passes through the check valve, and finally enters each bearing. By adjusting the throttle valve, the amount of oil and oil pressure entering each bearing can be controlled to keep the journal jacking height within a reasonable range. -
Circulating oil pump oil-suction filter WU-100X180J
The Circulating oil pump oil-suction filter WU-100X180J is used in the hydraulic system to filter out solid particles and colloidal substances in the working medium. It can effectively control the pollution degree of the working medium and protect the normal operation of the mechanical equipment by filtering the solid impurities generated in the external mixing of various oil systems or in the process of system operation. It is an indispensable part of the transmission medium pipeline series. -
Servo Manifold Spray HP Bypass Oil Filter C6004L16587
The servo manifold spray hp bypass oil filter C6004L16587 is an oil filter element used in the hydraulic servomotor system. It is located in the high-pressure system of hydraulic servo-motor and used to filter impurities and dirt in the hydraulic servo-motor system. Make the hydraulic servomotor better provide power oil to the main steam valve and governing valve of the steam turbine, so that it can act quickly, reliably and sensitively, and protect the safety of the steam turbine. -
Hydraulic filter element LH0160D020BN3HC
The hydraulic filter element LH0160D020BN3HC is a small feed pump turbine fire resistant oil return filter element, mainly installed on the oil suction path, pressure oil path, return oil pipeline, and bypass filtration system in the system. Hydraulic filter element LH0160D020BN3HC used to remove metal powder and other mechanical impurities from worn components in the oil, keeping the oil circuit clean and extending the service life of the oil.
Brand: YOYIK -
Regeneration device anion filter PA810-002D
The regeneration device anion filter PA810-002D is mainly installed in the regeneration device of the EH oil system, which can filter the EH oil in the device. This filter element, also known as the dry ion exchange resin filter element, has an acid removal ability 7 times higher than that of diatomaceous earth, can improve the resistivity of phosphate ester resistant fuel, avoid electrochemical corrosion of the components, and can filter out metal ions (C, Mg, Fe, etc.) in the EH oil. The regeneration device anion filter PA810-002D adopts a stainless steel structure, which is resistant to compression and not easy to crack, and has low environmental pollution. -
30-150-207 regeneration device diatomite oil filter element
Diatomite filter element 30-150-207 is used for acid removal of regeneration device of fire resistant oil system. When the anti-combustion oleic acid value increases, phosphoric acid reacts with the metal powder in diatomite to produce metal soap or metal salt, which endangers the servo valve. It will often block the filter element, grind the valve core after entering the servo valve, increase the internal leakage at first, and discard the servo valve at last. When the metal salt is found in the system, the servo valve will be damaged in batches. Filtration cannot be improved, and oil change is the important way.
/
