-
TD-2 Steam Turbine Heat Thermal Expansion Sensor
TD-2 series thermal expansion sensor is a sensor designed for the steam turbine industry to measure the absolute expansion displacement of the steam turbine unit. It has two indications, local and remote. The local indication has a large field of view, and it uses an intermediate frequency displacement sensor as the sensing element; the remote indication has good linearity, strong anti-interference, simple structure, not easy to damage, good reliability, can be used continuously for a long time, and the output is constant current. It has been selected by domestic large and medium-sized steam turbine manufacturers, and can also be used in other precise displacement occasions. It is suitable for measurement and protection of steam turbine cylinder expansion. -
WTYY series Bimetal Thermometer Temperature Gauge
WTYY series thermometers are also called remote bimetal thermometers, which can not only meet the needs of on-site temperature measurement, but also meet the needs of long-distance transmission. Remote bimetal thermometers can directly measure the temperature of liquid, steam and gaseous media and solid surfaces in various production processes.
Thermometer WTYY series has the characteristics of small temperature probe, high sensitivity, linear scale, long life and so on. At the same time, it can also achieve a variety of functions such as remote transmission of resistance signals (PT100), shock resistance, corrosion resistance and high-power switching signals. It is easy to install and widely used in temperature measurement environments in the industrial industry. -
Bimetal Thermometer Gauge WSS-411
WSS-411 Bimetal Thermometer Gauge is a field detection instrument used for measuring medium and low temperatures of steam turbine bearings, which can be used to directly measure the temperature of liquefied and gas. Compared with glass mercury thermometers, it has the advantages of being mercury free, easy to read, and durable. Its protective tube, joint, locking bolt, etc. are all made of 1Cr18Ni9Ti material. The case is made of aluminum plate stretch molding and has a black electrophoretic treatment on the cutting surface. The cover and case adopt a circular double-layer rubber ring screw sealing locking structure, so the overall waterproof and anti-corrosion performance of the instrument is good. The radial type instrument adopts a curved pipe structure, with a novel, lightweight, and unique appearance.
Brand: YOYIK -
Ultrasonic Level Meter Probe CEL-3581F/G
The CEL-3581F/G ultrasonic level Meter Probe is generally used in conjunction with the CEL-3581F/G level gauge. This product is customized for power plants and meets the requirements of on-site working conditions. Its function is to measure the level of oil tanks.
The ultrasonic level gauge probe CEL-3581F/G of the main oil tank is set to output a maximum distance of 4mA and a minimum distance of 20mA. Multiple sensors are available for users to choose from, so you must choose the sensor that meets the requirements based on the application status, otherwise the instrument may not meet the usage requirements or be damaged. -
Limit Switch ZHS40-4-N-03K Inductive Proximity Switches
The limit switch ZHS40-4-N-03K is a precision inductive proximity switch based on a precision stable amplitude integrated circuit oscillator. Compared to traditional inductive proximity switches that generate switch signals based on oscillator start and stop, its positioning accuracy, time and temperature stability, and long-term reliability are significantly improved.
Brand: YOYIK -
APH Gap Control System Gap Sensor Probe GJCT-15-E
The key problem of air preheater seal clearance control system is the measurement problem of preheater deformation. The difficulty lies in the fact that the deformed preheater rotor is moving and the temperature inside the air preheater is close to 400 ℃, while there is also a large amount of coal ash and corrosive gas inside. It is very difficult to detect the displacement of moving objects in such harsh environments.
Brand: YOYIK -
Oil Water Alarm Level Switch OWK-1G
The oil water alarm level switch OWK-1G is used to detect the interface position of oil and water in the liquid. When the liquid level rises to the set position, the travel switch will trigger a signal, which can be used to control the operation of oil-water separation equipment and monitor the diffusion of oil pollutants. It plays an important role in oil-water separation systems, improving separation efficiency and protecting equipment and the environment.
Brand: YOYIK -
Platinum thermal resistance temperature sensor WZPM2-08-75-M18-8
The WZPM2-08-75-M18-8 platinum thermal resistance temperature sensor uses imported platinum resistance components, integrating good production technology, excellent testing methods, and years of manufacturing experience. This product meets the national standard ZBY-85 (equivalent to the IEC751-1983 standard of the Electrical Commission) and can be widely used in industries such as petroleum, chemical, power plants, metallurgy, light industry, food, scientific research, and machinery.
Brand: YOYIK -
Boiler Water level indicator electrode DJY2212-115
The electrical contact of DJY2212-115 Boiler Water level indicator electrode is a conductive liquid controlled component, which is sealed with 99.9% high-purity alumina ceramic tube and alloy steel using a special gold ceramic welding process. It is firm, reliable, responsive, and accurately controlled.
Brand: YOYIK -
Magnetic reed switch (sensor) CS1-F
Magnetic reed switch (sensor) CS1-F means induction through a magnet. This "magnet" is a magnet, and there are several types of magnets available. Commonly used magnets in the market include rubber magnets, permanent magnet ferrite, sintered neodymium iron boron, etc. Used for counting, limiting, and so on (mainly used for the production of door magnets and window magnets), and also used in various communication devices. In practical applications, permanent magnets are usually used to control the connection or disconnection of these two metal plates, hence they are also known as "magnetrons".
Brand: YOYIK -
SZ-6 Series Integrated Vibration Sensor
SZ-6 magnetoelectric speed sensor is an inertial sensor. It uses the principle of magnetoelectric induction to transform the vibration signal into a voltage signal, which is directly proportional to the vibration speed value. The sensor can be used to measure mechanical vibration with rotational speed as low as 5Hz. -
Integrated Bearing Vibration Transmitter JM-B-35
The Integrated Bearing Vibration Transmitter JM-B-35 is integrated vibration velocity transducer, which uses two-wire form, provide 4-20mA current signal, and rotating machinery vibration or bearing bush proportional to the velocity. It automatically collect machine vibration signals and converts the analog signal for PLC, DCS and DEH system. Mainly applies to measure the absolute vibration ( such as bearing vibration) of the rotary machinery. The Vibration Transmitter JM-B-35 all stainless steel shell integration designs, and output has polarity protection.
Brand: YOYIK
/
