-
Reset solenoid valve MFZ3-90YC
The reset solenoid valve MFZ3-90YC plays an important role in reset control in steam turbines and is mainly used in the protection system and regulation system of steam turbines. In the protection system, when there are faults such as overspeed, excessive axial displacement, low lubricating oil pressure, etc., the relevant protection device will be activated, and the reset solenoid valve is used to restore the initial state of the system after the fault is eliminated. In the regulation system, it can be used to control the position of some valves or mechanisms so that they can maintain the correct state under different operating conditions to achieve stable operation and precise regulation of the steam turbine.
Brand: YOYIK -
Solenoid Valve DF-2005
The solenoid valve DF2005 is a two-position three-way solenoid valve designed for steam turbines with excellent performance and reliability. It can achieve fast switching to meet the high requirements of steam turbines for controlling the flow of medium. This solenoid valve is widely used in the control system of steam turbines in power plants to ensure the safe and stable operation of the equipment.
Brand: YOYIK -
Globe valve SHV25
The globe valve SHV25 is a straight-through manual valve designed for high-pressure hydraulic systems. It is mainly used in the accumulator integrated control module of the turbine EH oil system. Its core function is to achieve medium on-off control through a high-precision sealing structure to ensure the safe operation of the system in a high-pressure, highly corrosive environment (such as fire-resistant oil medium). The valve has a nominal pressure rating of 1.6MPa and is made of stainless steel body material, which has both corrosion resistance and mechanical strength, and is suitable for long-term stable operation under harsh working conditions.
Brand: YOYIK -
Cellulose filter element DP903EA10V/-W for steam turbine fire-resistant oil regeneration device
The cellulose filter element DP903EA10V/-W is a high-efficiency filter element designed for the fire-resistant oil regeneration device of steam turbines. It can accurately intercept particulate pollutants in the oil and ensure the regeneration of EH oil.
Brand: Yoyik -
Double gear Pump GPA2-16-16-E-20-R6.3
The double gear pump GPA2-16-16-E-20-R6.3 is an internal gear pump with two independent gear pump units, each with its own driving gear and passive gear. This design enables it to provide stable flow and pressure while reducing pulsation and noise. The pump is suitable for a variety of industrial applications, especially where high-precision flow control and stable pressure output are required.
Brand: YOYIK. -
EH oil online filter machine fine filter JLX-30 for Steam turbine
The turbine EH oil online fine filter element JLX-30 is a core filter component designed specifically for hydraulic systems to ensure the cleanliness and stable operation of the turbine EH oil system. It effectively intercepts pollutants such as metal wear powder, seal rubber impurities, etc. generated during system operation.
Brand: Yoyik -
Metal gasket HZB253-640-03-24
Metal gasket HZB253-640-03-24 is the core sealing component in the boiler feed pump and booster pump system of the power plant. It is specially used for the end cover seal of the HZB253-640 horizontal double-suction single-stage double-volute pump. Its core function is to prevent high-pressure fluid leakage through a high-precision sealing interface, ensure the stable operation of the pump body under high temperature and high pressure conditions, and compensate for the slight deformation in the equipment assembly to maintain the alignment of the shaft system.
Brand: YOYIK. -
Hydraulic lubricating oil station filter ZNGL02010901
Model: ZNGL02010901
Applicable scenarios: Designed for lubrication stations and hydraulic systems in power plants, steel plants, petrochemicals, etc., suitable for oil purification of equipment such as steam turbines, rolling mills, and fans.
Brand: Yoyik -
Sealing ring DG600-240-07-03
The sealing ring DG600-240-07-03 is a high-performance sealing element designed for boiler feed water pumps. Its main function is to ensure the sealing performance of the fluid inside the pump body, prevent the medium in the pump from leaking to the external environment, and prevent external pollutants from entering the pump body, thereby ensuring the normal operation of the pump and extending its service life.
Brand: YOYIK -
EH oil actuator filter DP6SH201EA03V/-W for Steam turbine main steam valve
The EH oil filter element DP6SH201EA03V/-W for steam turbine oil motor has high-precision filtration, which is suitable for thermal power system, ensures the cleanliness of oil and prolongs the life of servo valve.
Brand: Yoyik -
Copper Washers FA1D56-03-21
The copper washer FA1D56-03-21 is a high-performance sealing element widely used in industrial equipment such as booster pumps. The Washer is made of high-purity copper material and has good electrical conductivity, thermal conductivity, corrosion resistance and mechanical strength. Its main function is to ensure that the fluid in the pump body does not leak into the external environment, while protecting the cleanliness of the pump and preventing impurities from entering the pump body, thereby ensuring the normal operation of the pump.
Brand: YOYIK -
Ion exchange resin filter element HQ25.300.21Z for steam turbine fire-resistant oil regeneration device
Ion resin filter element HQ25.300.21Z is a high-efficiency filter element designed for turbine fire-resistant oil regeneration system. It is mainly used to remove acidic substances, oxides, polar pollutants and tiny particles in the oil, restore the electrical properties and chemical stability of the fire-resistant oil, extend the service life of the oil, and ensure the safe and stable operation of the turbine regulation system.
Brand: YOYIK
/
