-
Hydraulic Accumulator NXQ-A-6.3/31.5-L-Y
The hydraulic accumulator NXQ-A-6.3/31.5-L-Y plays a variety of roles in the hydraulic system, such as storing energy, stabilizing pressure, reducing power consumption, compensating for leakage, absorbing pressure fluctuations, and mitigating impact forces.
Brand: YOYIK -
Accumulator Rubber Bladder NXQ-A-25/31.5
The accumulator rubber bladder NXQ-A-25/31.5 (also known as airbag) plays various roles in hydraulic systems, such as storing energy, stabilizing pressure, reducing power consumption, compensating for leakage, absorbing pressure pulsation, and reducing impact force. This rubber bladder is formed without adhesive and has strong endurance to fatigue, and has very low gas-liquid permeability.
Brand: YOYIK -
ACCUMULATOR BLADDER NXQ 40/31.5-L-E
The accumulator bladder NXQ 40/31.5-L-E is an important component of the bladder type accumulator, which is flexible and made of rubber, used for storing compressed inert gases. Generally, a certain pressure of nitrogen gas is injected into the leather bag, while hydraulic oil is filled outside the leather bag. The leather bag will deform with the compression of the hydraulic oil, compressing the nitrogen gas to store energy, otherwise releasing energy. The top of the accumulator generally adopts a large mouth structure, which is more conducive to the replacement of the leather bag.
Brand: YOYIK -
Online Hydrogen Leak Detector KQL1500
The Online Hydrogen Leak Detector KQL1500 produced by our company is a precision instrument specially used for gas leak detection. It can be widely used in electric power, steel, petroleum, chemical industry, ships, tunnels and other places, and can be used for online monitoring of the leakage of various gases (such as hydrogen, methane and other combustible gases). The instrument adopts the most advanced sensor technology in the world, which can simultaneously conduct multi-point real-time quantitative monitoring on the parts requiring leak detection. The whole system is composed of a host and up to 8 gas sensors, which can be flexibly controlled. -
LVDT Transmitter LTM-6A
The LVDT Transmitter LTM-6A is suitable for TD series six wire displacement sensors, with functions such as one key zero to full, sensor disconnection diagnosis, and alarm. LTM-6A can reliably and accurately convert the displacement of LVDT rods into corresponding electrical quantities. It has a MODBUS interface and can communicate with other devices, becoming a truly intelligent local device. -
OWK Series Oil-Water Alarm
The OWK series oil-water alarm detects the oil leakage in the hydrogen-cooled generator units. It has simple structure and is easy to install. It is composed of sheild, float, permanent magnet and magnetic switch. When liquid enters the shell, the float will move. The upper part of the float rod is equipped with a permanent magnet. When the float rises to a certain distance, the magnetic switch will act to turn on the electrical signal, and send out an alarm. When the liquid inside the shell is discharged, the float falls by its own weight, and the magnetic switch acts as a cut-off signal, and the alarm is released. An observation window made of oil-resistant Plexiglas is installed on the shell of the alarm to facilitate the inspection of the liquid level. -
Oil Transfer Gear Pump 2CY-45/9-1A
The 2CY-45/9-1A oil transfer gear pump (hereinafter called as the pump) is used to transfer various oil media with lubricity, temperature of not more than 60℃ and viscosity of 74x10-6m2/s below. After modification, it may transfer oil media with temperature of not more than 250℃. It is not suitable for the liquid with high sulfur ingredient, causticity, hard particle or fiber, high volatility, or low flash point. -
DC Electric Heater Control Cabinet DJZ-03
DJZ-03 Control Cabinet of DC Electric Heater is designed and manufactured for heating control for big bolts of steam turbines. For big bolts over 56mm in diameter, the securing moment required is too big to achieve under ambient condition. As such, in order to secure the big bolts, the bolts are secured to a certain moment under ambient condition at first, then they are to be lengthened through heating, and the corresponding nuts are to be turned in a certain arc length, the bolts finally are to be secured to certain tightness. -
Jacking Oil System Backwash Filter ZCL-I-450
Jacking Oil System Backwash Filter ZCL-I-450 is widely used in turbine oil system and auxiliary lubrication system, as well as thin oil circulating lubrication system of large equipment in metallurgy, mining, petrochemical, light industry, etc. In addition, the device is used as a temporary filtering device in the oil circulation stage of the steam turbine unit, which can improve the flushing quality of the oil system, shorten the oil circulation time, ensure that the unit is put into operation in advance, and create considerable social and economic benefits. -
Jacking oil pump discharge filter DQ8302GAFH3.5C
Jacking oil pump discharge filter DQ8302GAFH3.5C is used for filtering the outlet of jacking oil pump. The oil source of the jacking oil pump comes from the lubricating oil after the oil cooler, passing through 45 μM Automatic backwash filtration device for coarse filtration, and then 20 μM double-tube filter enters the oil suction port of jacking oil pump. After being boosted by the oil pump, the oil pressure at the outlet of the oil pump is 12.0MPa. The pressure oil enters the diverter through the single-tube high-pressure filter, passes through the check valve, and finally enters each bearing. By adjusting the throttle valve, the amount of oil and oil pressure entering each bearing can be controlled to keep the journal jacking height within a reasonable range. -
Circulating oil pump oil-suction filter WU-100X180J
The Circulating oil pump oil-suction filter WU-100X180J is used in the hydraulic system to filter out solid particles and colloidal substances in the working medium. It can effectively control the pollution degree of the working medium and protect the normal operation of the mechanical equipment by filtering the solid impurities generated in the external mixing of various oil systems or in the process of system operation. It is an indispensable part of the transmission medium pipeline series. -
Servo Manifold Spray HP Bypass Oil Filter C6004L16587
The servo manifold spray hp bypass oil filter C6004L16587 is an oil filter element used in the hydraulic servomotor system. It is located in the high-pressure system of hydraulic servo-motor and used to filter impurities and dirt in the hydraulic servo-motor system. Make the hydraulic servomotor better provide power oil to the main steam valve and governing valve of the steam turbine, so that it can act quickly, reliably and sensitively, and protect the safety of the steam turbine.
/
