-
Generator stator RTV epoxy adhesive J0708
Generator stator RTV epoxy adhesive J0708 is a two component epoxy adhesive composed of A and B components. It is suitable for insulation treatment at motor stator bar joints, connecting wire joints, etc. When using room temperature mica tape semi laminated insulation, the mica tape is applied between layers. It has excellent insulation performance and good adhesion. The heat resistance level is F grade.
Brand: YOYIK -
Generator RTV epoxy adhesive J0792
Generator RTV epoxy adhesive J0792 is a two component epoxy impregnating paint mainly used for on-site impregnation treatment of generator winding binding tapes and gasket materials. After brushing, it can improve the insulation performance and mechanical strength of the binding tapes, and extend their service life. At the same time, it can also be used for the treatment of insulation components, improving their insulation performance and enabling them to adapt to high temperature and high voltage working environments. If it is necessary to accelerate the drying progress, heating drying can be carried out to improve work efficiency.
Brand: YOYIK -
RTV Silicon steel sheets adhesive J0705
RTV Silicon steel sheets adhesive J0705 is a two component curing adhesive. Composed of low viscosity epoxy resin and curing agent. Before use, the two components need to be mixed evenly and coated with a brush on the end face of the stator core or between silicon steel sheets.
Brand: YOYIK -
High resistance anti corona paint DFCJ1018
High resistance anti corona paint DFCJ1018 is made by grinding carbon black as the main raw material, and then mixing it with insulation varnish and an appropriate amount of desiccant. It is suitable for anti-corona use in high-voltage motors and electrical appliances, such as at the end of coils with high voltage in large high-voltage motors.
Brand: YOYIK -
Generator Epoxy adhesive DFCJ1306
Generator Epoxy adhesive DFCJ1306 is a mixture of insulating paint and fillers, widely used in industrial equipment such as power plants, metallurgical plants, and steel mills, for anti-corona treatment of high-voltage motor stator coils. Ensure the safe operation of on-site equipment.
Brand: YOYIK -
MG00.11.19.01 coal mill Hydraulic reversing valve
Coal mill loading system is an important part of coal mill, which consists of high pressure oil pump station, oil pipeline, hydraulic reversing valve, loading cylinder, accumulator and other components. Its function is to apply suitable grinding pressure to the grinding roller, and the loading pressure is controlled by the proportional relief valve according to the command signal: the grinding roller is raised and lowered synchronously. -
Insulating box filling adhesive J0978
Insulating box filling adhesive J0978 is a two-component room temperature curing pouring adhesive prepared from epoxy resin, special inorganic fillers, and curing agents for generator insulation boxes. This epoxy adhesive refers to an electronic adhesive or adhesive that can seal or package some components (such as resistive and capacitive circuit boards in the electronics industry). After packaging, it can play a waterproof, moisture-proof, shockproof, dustproof, waterproof, heat dissipation, and sealing role.
Brand: YOYIK -
COPALTITE High Temperature Sealant
COPALTITE High Temperature Sealant is a heat-resistant compound used to seal threads, flanges, and high-temperature and high-pressure pipe fittings. COPALTITE sealant performs well in the temperature range of 150 ℃ to 815 ℃. After heating the area to be sealed at 150 ℃ for 15 minutes, COPALTITE can be cured into a sealant, which is extremely heat-resistant and chemical resistant, and has excellent vibration resistance, thermal shock resistance and chemical resistance. It can form a long-term seal and can be removed if necessary. -
DFSS type steam turbine cylinder sealing grease
DFSS type steam turbine cylinder sealing grease is an upgraded MF type product. It is used for sealing the joint surface of power station and industrial steam turbine cylinder body. It is a one component solvent-free 100% solid content, which can be cured immediately after heating up. It does not contain asbestos, halogen and other harmful ingredients to human body, and can withstand high temperature. Its performance indicators can fully meet the operation requirements of units below 300MW or above 600MW; It can be used alone or combined with copper asbestos gasket to seal the flange surface of other high-temperature furnace pipes.
Salient features: thixotropic paste will not precipitate, will not harden at low temperature, and will not flow at high temperature, which is convenient for on-site construction. -
MFZ-4 steam turbine cylinder sealing grease
MFZ-4 cylinder sealing grease is a liquid paste sealant manufactured by YOYIK. It is specially used for sealing the cylinder joint surface in thermal power plants and industrial steam turbines. It can resist 680℃ heat and 32Mpa steam pressure. With this excellent high temperature resistance, high pressure performance and strong adhesion performance, it is an ideal sealing material for steam turbine installation and maintenance in thermal power plant. It can also be used for high temperature sealing of flange surface of high temperature furnace pipeline. -
High Temperature steam turbine cylinder sealing grease MFZ-2
High Temperature steam turbine cylinder sealing grease MFZ-2 is a liquid paste sealant that does not contain asbestos, lead, mercury and other harmful ingredients to human body. It is widely used in thermal power station and industrial steam turbine body cylinder junction surface sealing, which can resist special high temperature of 600 ℃, main steam pressure of 26MPa, and has good high-pressure performance and adhesion performance. It is an ideal sealing material for steam turbine installation and maintenance in thermal power plant, It can also be used for sealing the flange surface of high-temperature hot furnace pipelines.
Brand: YOYIK -
High Temperature cylinder sealing grease MFZ-3
MFZ-3 cylinder sealing grease is used for sealing the joint surface of power plants and industrial steam turbine cylinder bodies. It is a single component solvent free 100% solid content, and can be cured immediately upon heating. It does not contain harmful ingredients such as asbestos and halogens, and can withstand high temperatures. Its performance indicators can fully meet the operating requirements of 300MW and below units; It can be used alone or combined with copper asbestos gaskets for high-temperature sealing of other high-temperature furnace pipeline flanges.
Brand: YOYIK