-
AST solenoid valve GS021600V
The AST solenoid valve GS021600V is a kind of plug-in valve is equipped with a CCP230M coil and can be used as a solenoid valve with different functions. The electromagnetic valve is installed in the emergency trip system to check some operating parameters of the steam turbine. When these parameters exceed their operating limits, the system will issue a trip signal to close all steam inlet valves of the turbine to protect the safety of the unit. -
AST solenoid valve SV13-12V-0-0-00
AST solenoid valve SV13-12V-0-0-00 is a 2-way, 2-position, poppet type, high pressure, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve. -
OPC solenoid valve 4WE6D62/EG220N9K4/V
The solenoid valve 4WE6D62/EG220N9K4/V adopts advanced proportional control technology, which can achieve precise control of flow, direction, and pressure. It has advantages such as fast response speed, high accuracy, and strong reliability. Its main purpose is to control the flow, direction, and pressure of liquids in hydraulic systems, and is widely used in hydraulic systems in fields such as machinery, metallurgy, petrochemical, and light industry. -
AST solenoid valve Z2805013
The AST solenoid valve Z2805013 belongs to the ETS actuator and is installed on the integrated block. It is mainly used to execute signals sent by superiors and receive tasks. Control the direction of hydraulic flow, solenoid valve Z2805013 is used for the emergency trip control block of the ETS system in the power plant. ETS is a protective device for the emergency trip system of the steam turbine, which receives alarm or shutdown signals from the TSI system or other systems of the steam turbine generator set, performs logical processing, and outputs indicator light alarm signals or steam turbine trip signals. -
Steam Turbine EH Oil System Servo Valve 072-559A
The electrohydraulic servo valve 072-559A is an important component of the hydraulic servo system. It is a hydraulic control valve that continuously controls flow and pressure in proportion by changing input signals. The minimum flow size of the nozzle valve is about 0.2 mm, while the minimum flow size of the nozzle baffle servo valve is 0.025~0.10 mm. Therefore, the nozzle has strong anti-pollution ability, high reliability, and long service life. The anti-pollution ability of servo valves is generally determined by the minimum flow rate in their structure. However, in multistage servo valves, the minimum size in the front stage oil circuit becomes the decisive factor. -
Flow Control Servo Valve 072-1202-10
Flow Control Servo Valve 072-1202-10 is mainly used for high pressure regulating valve of main machine in power plant, intermediate pressure regulating valve of main steam valve, main steam valve and other parts. When changing oil in the system, the servo valve should be thoroughly cleaned of the oil tank before injecting new oil, and replaced with a flushing plate. After passing through 5~10 μ The m oil filter fills the oil tank with new oil. Start the oil source, flush for more than 24 hours, then replace or clean the filter, and complete the re cleaning of the pipeline and oil tank. If the servo valve is blocked during use, users who do not have the necessary conditions are not allowed to disassemble the servo valve without authorization. Users can replace the filter according to the instructions. If the fault cannot be eliminated, it should be returned to the production unit for repair, troubleshooting, and adjustment. -
SM4-20(15)57-80/40-10-S182 actuator electro-hydraulic servo valve
SM4-20(15)57-80/40-10-S182 actuator electro-hydraulic servo valve can provide system closed loop control with exact positional accuracy, repeatable velocity profles, and predictable force or torque regulation.
Typical applications include plastic injection molding and blow molding systems, test and simulation equipment, die casting machines, hydraulic press brakes, animation and entertainment equipment, oil exploration vehicles, and lumber machinery.
This model of the high performance SM4 series offers a wide range of rated flows from 3,8 to 76 l/min (1.0 to 20 USgpm) at ∆p of 70 bar (1000 psi).
The SM4 is a two-stage, modular design, flow control valve which can be manifold or subplate mounted. The symmetrical, dual coil, quad air gap torque motor is integrally mounted to the frst stage nozzle flapper pilot valve with six screws. The second stage utilizes a four-way sliding spool and sleeve arrangement with a mechanical null adjust. Spool position is fed back to the frst stage by means of a cantilever spring. An integral 35 micron (absolute) flter reduces sensitivity to contamination of the frst stage. -
Electro-hydraulic servo valve G761-3034B
G761-3034B Electro-hydraulic servo valve is an actuator that converts electrical signal input into high-power pressure or flow pressure signal output. It is an electro-hydraulic conversion and power amplification component that can convert small electrical signals into large hydraulic power, driving various types of loads. This series of electro-hydraulic servo valves can be used as three-way and four-way throttle flow control valves, with fast response, pollution, and other characteristics, suitable for position, velocity, force (or pressure) co servo control systems. -
Steam turbine servo valve PSSV-890-DF0056A
The servo valve PSSV-890-DF0056A is mainly used for automation control in control systems. In addition to being used in the power plant industry, it is also widely used in other hydraulic control systems, such as machine tools, injection molding machines, metallurgical equipment, aerospace equipment, automobiles, ships, petroleum, chemical engineering, water conservancy, mining, and other fields. In addition, the servo valve PSSV-890-DF0056A can also be used for adjusting and controlling parameters such as flow, pressure, liquid level, and temperature in industrial automation control systems, as well as precise control and motion control in fields such as robots, stages, and display equipment. -
Servo valve SV4-20(15)57-80/40-10-S451
Servo valve SV4-20 (15) 57-80/40-10-S451 outputs modulated flow and pressure after receiving electrical analog signals. It is not only an electro-hydraulic conversion component, but also a power amplifier component. It can convert small and weak electrical input signals into high-power hydraulic energy (flow and pressure) output. In an electro-hydraulic servo system, it connects the electrical and hydraulic parts to achieve the conversion of electro-hydraulic signals and hydraulic amplification. The electro-hydraulic servo valve is the core of the control of the electro-hydraulic servo system. -
Steam turbine Servo Valve J761-003A
The servo valve J761-003A is also an excellent equipment servo valve, suitable for electro-hydraulic position, speed, pressure or force control systems that require high dynamic response, providing guarantees for the safe and efficient operation of the system. -
Servo valve SM4-40(40)151-80/40-10-H919H
Servo valve SM4-40(40)151-80/40-10-H919H is widely used in electro-hydraulic position, velocity, acceleration, force servo systems, and servo vibration generators. It has the advantages of small size, compact structure, high power amplification coefficient, high control accuracy, good linearity, small dead zone, high sensitivity, good dynamic performance, and fast response speed.
/
