-
Bimetal Thermometer Gauge WSS-411
WSS-411 Bimetal Thermometer Gauge is a field detection instrument used for measuring medium and low temperatures of steam turbine bearings, which can be used to directly measure the temperature of liquefied and gas. Compared with glass mercury thermometers, it has the advantages of being mercury free, easy to read, and durable. Its protective tube, joint, locking bolt, etc. are all made of 1Cr18Ni9Ti material. The case is made of aluminum plate stretch molding and has a black electrophoretic treatment on the cutting surface. The cover and case adopt a circular double-layer rubber ring screw sealing locking structure, so the overall waterproof and anti-corrosion performance of the instrument is good. The radial type instrument adopts a curved pipe structure, with a novel, lightweight, and unique appearance.
Brand: YOYIK -
Bolt Electric Heater HY-GYY-1.2-380V/3
The Bolt Electric Heater HY-GYY-1.2-380V/3 is used for heating oil in EH oil tank. It is equipped with a jacket to protect the heating element. It can be removed when using. When the electric heater HY-GYY-1.2-380V/3 works to the fatigue limit and is damaged, it is not necessary to replace the device as a whole, and the heating element can be quickly replaced separately, saving time and money.
Brand: YOYIK -
RTD thermocouple temperature sensor probe WZP2-231
The RTD thermocouple temperature sensor probe WZP2-231 has the characteristics of bending resistance, high temperature resistance, fast thermal response time and durability. Like the industrial thermocouple, it is used as a temperature sensor, which is usually matched with display instruments, recording instruments and electronic regulators. At the same time, it can also be used as the temperature sensing element of the assembled thermocouple, and can directly measure the temperature of liquid, steam and gas medium and solid surface within the range of 0 ℃ - 400 ℃ in various production processes.
Brand: YOYIK -
Steam Turbine Rotation Speed Sensor CS-2
CS-2 Rotational Speed Sensor is able to output accurate waves under low rotational speed and low gear speed. With the maximum installation gap of 2.0mm, the CS-2 speed sensor can avoid the probe being damaged by the rotating tooth disc. It is especially suitable for seriously asymmetrical disc. CS-2 Rotational Speed Sensor has stainless steel threaded shell, casting sealed inner structure, and oil resistant and high temperature resistant wire. It can be applied to smoke, oil and gas, water vapor and other harsh environments. The sensor must not be near any magnetic field or strong current conductor, which will interrupt the output signal.
Brand: YOYIK -
Rotation Speed Sensor probe CS-3
Rotation Speed Sensor probe CS-3 has strong anti-interference performance, the shell is made of stainless steel thread structure, which is easy to install and fix, and the interior is sealed. It can be used in smoke, oil gas, water vapor and other harsh environments. Speed Sensor probe CS-3 is suitable for monitoring and protection of zero speed and reverse rotation of industrial feed water pump, water turbine, compressor and blower.
Brand: YOYIK -
Active/Reactive Power (Watt/ Var) Transducer S3(T)-WRD-3AT-165A4GN
Active/Reactive Power (Watt/ Var) Transducer S3(T)-WRD-3AT-165A4GN is an instrument that can convert the measured active power, reactive power and current into DC output. The converted DC output is linear proportional output and can reflect the transmission direction of the measured power in the line. The transmitter is applicable to various single and three-phase (balanced or unbalanced) lines with frequencies of 50HZ, 60HZ and special frequencies, equipped with appropriate indicating instruments or equipment, and can be widely used in power plants, power transmission and transformation systems and other places with high requirements for power measurement. -
Integrated Bearing Vibration Transmitter JM-B-35
The Integrated Bearing Vibration Transmitter JM-B-35 is integrated vibration velocity transducer, which uses two-wire form, provide 4-20mA current signal, and rotating machinery vibration or bearing bush proportional to the velocity. It automatically collect machine vibration signals and converts the analog signal for PLC, DCS and DEH system. Mainly applies to measure the absolute vibration ( such as bearing vibration) of the rotary machinery. The Vibration Transmitter JM-B-35 all stainless steel shell integration designs, and output has polarity protection.
Brand: YOYIK -
Platinum Resistor Temperature Sensor WZPM-201
The Platinum Resistor Temperature Sensor WZPM-201 end face thermal resistance element is wound by specially treated wire and is close to the end face of the thermometer. Compared with the general axial thermal resistance, it can reflect the actual temperature of the measured end face more accurately and quickly, and is suitable for measuring the end face temperature of the bearing bush or other mechanical parts. Platinum Resistor Temperature Sensor WZPM-201 is suitable for surface temperature measurement of steam turbine and generator bearings, bearing temperature measurement of equipment with bearing equipment in power plant, and other temperature measurement for shock-proof applications.
Brand: YOYIK -
LVDT displacement Sensor 2000TD
LVDT displacement Sensor 2000TD converts mechanical measurement of liner movement into electrical power. Through this principle, sensors measure and control displacement automatically. TD series displacement sensors have simple structure, high reliability, excellent usage and maintainability, long life, good linearity and high repeat precision. It also has a wide measuring range, low time constant and fast dynamic response.
Brand: YOYIK -
LVDT Position Sensor TD-1 0-100
LVDT Position Sensor TD-1 0-100 uses the principle of differential inductance to convert linearly-moving mechanical quantities into electrical quantities for automatic displacement monitoring and control.
LVDT Position Sensor TD-1 0-100 has small size, high accuracy, stable performance, good reliability, long life and so on. In the power plant environment of high temperature from 80℃ to 120℃, it can continuously run a steam turbine overhaul cycle without replacement or maintenance.
Brand: YOYIK -
KEY PULSES (KEY PHASOR) Rotation Speed Sensor DF6202-005-050-04-00-10-000
Rotation Speed Sensor DF6202-005-050-04-00-10-000 is our new generation of high-performance speed sensor. It has an input frequency range of low to zero speed and up to 25 KHz, which can be used in almost any speed measurement occasions. The installation clearance of the sensor can reach 3.5mm, making the sensor not easy to be damaged by the rotating gear plate, and the installation is extremely convenient. Rotation Speed Sensor DF6202-005-050-04-00-10-000 can work reliably for a long time in harsh environments such as oil, water and steam, with good vibration and impact resistance, no moving parts, non-contact and long service life.
BRAND: YOYIK -
Steam Turbine Magnetic Rotation Speed Sensor SMCB-01-16L
SMCB-01-16L magnetic rotation speed sensor adopts a new SMR element, which is triggered by a steel material permeable magnet. It has the characteristics of wide frequency response (from static to 30KHZ), good stability, and strong anti-interference. There is an amplifying and shaping circuit inside to output a square wave signal with stable amplitude, which can realize long-distance transmission. It can measure rotation speed, displacement, angular displacement measurement and precise positioning of related equipment. The product has high reliability, sturdiness and durability.
BRAND: YOYIK
/
