page_banner

Products

  • Pressure Switch ST307-V2-350-B

    Pressure Switch ST307-V2-350-B

    Pressure switch ST307-V2-350B is usually used as an action indicator signal in protection and automatic control devices for AC and DC operations. The relay adopts imported ultra-small components, with reasonable layout and structure of electronic circuit design. The pressure switch is driven by an adjustable loading spring operating board. The spring load holds the operating plate on the switch until hydraulic pressure is applied to the small piston to force the operating plate far away from the close to switch contacts. When the hydraulic pressure drops by a small difference, the switch will reset.
  • DWQZ series proximitor Axial displacement Eddy current sensor

    DWQZ series proximitor Axial displacement Eddy current sensor

    Eddy current sensor is a non-contact linear measurement tool. It has the advantages of good long-term reliability, wide measurement range, high sensitivity, high resolution, fast response, strong anti-interference, free from the influence of oil and other media, so it is widely used in power, petroleum, chemical, metallurgical and other industries, such as steam turbine, water turbine, blower, compressor, gearbox, etc Dynamic and static non-contact displacement measurement of large rotating machinery such as large cooling pump.

    DWQZ series Eddy current sensor is composed of three parts: DWQZ probe, DWQZ extension cable and DWQZ proximitor.
  • SZ-6 Series Integrated Vibration Sensor

    SZ-6 Series Integrated Vibration Sensor

    SZ-6 magnetoelectric speed sensor is an inertial sensor. It uses the principle of magnetoelectric induction to transform the vibration signal into a voltage signal, which is directly proportional to the vibration speed value. The sensor can be used to measure mechanical vibration with rotational speed as low as 5Hz.
  • Vibration speed Sensor HD-ST-A3-B3

    Vibration speed Sensor HD-ST-A3-B3

    HD-ST-A3-B3 Vibration speed sensor is connected with intelligent vibration monitor or transmitter to measure various displacements and velocities, detect early failures of various rotating machinery, and output standard 4-20mA current signals to PLC, DCS, and DEH systems. It provides signals for monitoring instruments to predict and alarm mechanical faults.
    Brand: YOYIK
  • Magnetoresistive speed sensor SZCB-01-A1-B1-C3

    Magnetoresistive speed sensor SZCB-01-A1-B1-C3

    The Magnetoresistive speed sensor SZCB-01-A1-B1-C3 adopts the principle of electromagnetic induction to achieve speed measurement. This sensor has strong output signal, good anti-interference performance, convenient installation and use, and can be used in harsh environments such as smoke, oil and gas, and water vapor.
    Brand: YOYIK
  • Integrated Bearing Vibration Transmitter JM-B-35

    Integrated Bearing Vibration Transmitter JM-B-35

    The Integrated Bearing Vibration Transmitter JM-B-35 is integrated vibration velocity transducer, which uses two-wire form, provide 4-20mA current signal, and rotating machinery vibration or bearing bush proportional to the velocity. It automatically collect machine vibration signals and converts the analog signal for PLC, DCS and DEH system. Mainly applies to measure the absolute vibration ( such as bearing vibration) of the rotary machinery. The Vibration Transmitter JM-B-35 all stainless steel shell integration designs, and output has polarity protection.
    Brand: YOYIK
  • DET Series Displacement Sensors

    DET Series Displacement Sensors

    DET series Displacement Sensor is based on the principle of differential inductance, which converts linear moving mechanical quantity into electric quantity, so as to automatically monitor and control displacement. It has the advantages of high temperature resistance, small size, high accuracy, stable performance, reliable operation and long service life. It can run continuously for one overhaul cycle of steam turbine without maintenance and replacement.
  • HL Series Displacement Sensors

    HL Series Displacement Sensors

    HL series Displacement Sensor is based on the principle of differential inductance, which converts linear moving mechanical quantity into electric quantity, so as to automatically monitor and control displacement. It has the advantages of high temperature resistance, small size, high accuracy, stable performance, reliable operation and long service life. It can run continuously for one overhaul cycle of steam turbine without maintenance and replacement.
  • HTD series LVDT displacement actuator position sensor

    HTD series LVDT displacement actuator position sensor

    HTD series displacement sensors convert mechanical measurement of liner movement into electrical power. Through this principle, sensors measure and control displacement automatically. So it is widely used in industrial productions, defense constructions, research institutes and other aspects. HTD series displacement sensors have simple structure, high reliability, excellent usage and maintainability, long life, good linearity and high repeat precision. It also has a wide measuring range, low time constant and fast dynamic response.
  • LVDT sensor TD series Armored cable LVDT sensor with bracket

    LVDT sensor TD series Armored cable LVDT sensor with bracket

    TD series displacement sensors convert mechanical measurement of liner movement into electrical power. Through this principle, sensors measure and control displacement automatically. TD series displacement sensors have simple structure, high reliability, excellent usage and maintainability, long life, good linearity and high repeat precision. It also has a wide measuring range, low time constant and fast dynamic response.
  • TDZ-1E series linear displacement transducer LVDT position sensor

    TDZ-1E series linear displacement transducer LVDT position sensor

    TDZ-1E series displacement sensors convert mechanical measurement of liner movement into electrical power. Through this principle, sensors measure and control displacement automatically. TDZ-1E series displacement sensors have simple structure, high reliability, excellent usage and maintainability, long life, good linearity and high repeat precision. It also has a wide measuring range, low time constant and fast dynamic response.
  • LVDT displacement Sensor 2000TD

    LVDT displacement Sensor 2000TD

    LVDT displacement Sensor 2000TD converts mechanical measurement of liner movement into electrical power. Through this principle, sensors measure and control displacement automatically. TD series displacement sensors have simple structure, high reliability, excellent usage and maintainability, long life, good linearity and high repeat precision. It also has a wide measuring range, low time constant and fast dynamic response.
    Brand: YOYIK