Home
Products
Sensor
Speed Sensor
Lvdt Sensor
Press Sensor
Eddy Current Sensor
Other Sensor
Filter
Oil Filter
Air Filter
Water Filter
Pump
Oil Pump
Water Pump
Other Pump
Pump Spare Parts
Valve
Globe Valve
Solenoid Valve
Servo Valve
Float Valve
Differential Pressure Valve
Other Valve
Automatic Control
cards & module
Meter
Transmitter
PLC
other
Power Generation Equipment Parts
Steam Turbine Parts
Generator Parts
Boiler Parts
Auxiliary Parts
Insulating Material
Insulating Adhesive & Paint
Insulation Pressed Parts
Insulating Material
Sealing Material
Sealant
Sealing Grease
Sealing Strip
Seal Ring
Others
Bearing
Bearing
Accumulators And Bladders
Accumulators Bladders And Spare Parts
News
About Us
Company Profile
History
Support
Supply Chain
Service
Contact Us
FAQs
/
English
Products
Rotation Speed Sensor probe CS-3
Rotation Speed Sensor probe CS-3 has strong anti-interference performance, the shell is made of stainless steel thread structure, which is easy to install and fix, and the interior is sealed. It can be used in smoke, oil gas, water vapor and other harsh environments. Speed Sensor probe CS-3 is suitable for monitoring and protection of zero speed and reverse rotation of industrial feed water pump, water turbine, compressor and blower.
Brand: YOYIK
inquiry
detail
Steam Turbine Rotation Speed Sensor CS-2
CS-2 Rotational Speed Sensor is able to output accurate waves under low rotational speed and low gear speed. With the maximum installation gap of 2.0mm, the CS-2 speed sensor can avoid the probe being damaged by the rotating tooth disc. It is especially suitable for seriously asymmetrical disc. CS-2 Rotational Speed Sensor has stainless steel threaded shell, casting sealed inner structure, and oil resistant and high temperature resistant wire. It can be applied to smoke, oil and gas, water vapor and other harsh environments. The sensor must not be near any magnetic field or strong current conductor, which will interrupt the output signal.
Brand: YOYIK
inquiry
detail
DP201EA01V-F actuator inlet flushing oil filter element
DP201EA01V/-F filter element is the steam turbine actuator working filter element. It is installed in the turbine actuator of the EH oil system. It is used to filter out the solid particles and colloidal substances in the anti-fuel oil, and effectively control the pollution degree of the anti-fuel oil. Filter the anti-fuel oil entering the servo valve to protect the servo valve.
inquiry
detail
OF3-08-3RV-10 EH oil main tank circulating pump suction filter
Filter element OF3-08-3RV-10 is used for circulating pump. The circulating oil filtering and cooling circuit is used to filter and cool the fire-resistant oil. It is mainly composed of a fire-resistant oil circulating pump, an oil filter and two coolers. When the oil cooler and the oil filter are put into operation for a long time, the oil will return to the oil tank.
inquiry
detail
SH006 EH oil regeneration cellulose precision filter
SH006 EH oil regeneration cellulose precision filter is made of stainless steel frame, stainless steel end cap, imported filter material and imported filler. It is specially developed for the anti-fuel oil system of steam turbines. It can effectively filter out particulate impurities and colloidal substances in anti-fuel oil and maintain EH anti-fuel oil. level of cleanliness. Together with the diatomite filter element, it constitutes the secondary filtration system of the regeneration device. It is an important EH oil physical and chemical index adjustment device and an important hydraulic auxiliary equipment to ensure the normal operation of the EH oil system. The precision filter SH006 is suitable for intercepting impurities in the regeneration device of the anti-fuel oil system of the steam turbine of the power plant.
inquiry
detail
BR110 air filter Compressed air impurity filtration
Air filter BR110, the compressed air from the air source contains excessive water vapor and oil droplets, as well as solid impurities, such as rust, sand, pipe sealants, etc., which will damage the piston sealing ring and block the components on the small vent holes, shorten the service life of components or make them ineffective. The function of the air filter is to separate the liquid water and liquid oil droplets in the compressed air, and filter out the dust and solid impurities in the air, but cannot remove the gaseous water and oil.
inquiry
detail
LX-FF14020041XR Compressor air filter element
LX-FF14020041XR compressor air filter element for removal dryer inlet impurity. The filter element uses borosilicate nano-glass fiber as the main filter material, which can filter out the oil-water aerosol particles in the compressed air, effectively prolong the service life of the adsorbent, and has a relatively high dust removal and filtering accuracy and a certain dehumidification and drying capacity.
inquiry
detail
Reverse Rotation Speed Sensor CS-3F
The reverse speed sensor CS-3F can be used to detect the positive and negative rotation, rotational speed, linear speed, etc. of gears, racks and axles. The acceleration of the measured body can also be obtained through calculation and processing. The reverse speed sensor CS-3F has good low frequency and high frequency characteristics, and its low frequency can be as low as 0Hz, which can be used for the zero speed measurement of rotating machinery. Since the sensor can give two speed signals with a certain phase difference, it can be used for positive and negative rotation discrimination. The high frequency can be as high as 20 KHz, which can meet the high speed measurement requirements of most industrial fields.
inquiry
detail
CS-1 Series Rotational Speed Sensor
CS-1 Rotational Speed Sensor is based on electromagnetic induction principle,outputs frequency signals which are directly proportional to the rotational speed of the rotating machinery. Its outer shell is made of stainless steel screw thread, sealed inside and is heat-resistance. The connection cable is shielded flexible conductor and has strong anti-interference performance. The sensor has large output signal, no need to amplify; has good anti-jamming performance, no need for external power supply; and can be used in smoke, oil, gas, water and other harsh environments.
inquiry
detail
Magnetic Liquid Level Indicator UHC-DB
The Magnetic Liquid Level Indicator UHC-DB can be used for measuring the medium level of various towers, tanks, tanks, spherical containers, boilers, and other equipment. It can achieve high sealing, leak prevention, and adapt to liquid level measurement under high pressure, high temperature, and corrosive conditions, ensuring safety and reliability.
Brand: YOYIK
inquiry
detail
Boiler Air Preheater Infrared array probe HSDS-30/T
The Infrared array probe HSDS-30/T uses infrared signals to monitor the surface temperature of heating components. When the measured temperature is 150-200 ℃, it triggers an alarm and takes necessary measures to nip the fire alarm in the bud before reaching the metal ignition temperature, thereby protecting the safety of boiler equipment and personnel.
Brand: YOYIK
inquiry
detail
Steam turbine EH oil Filter element QTL-63
The inlet filter element QTL-63 of the EH oil circulation pump is used for the filter. The filter is an indispensable device on the transmission medium pipeline, usually installed at the inlet end of equipment such as pressure reducing valves, relief valves, and constant water level valves. After the treated water passes through the filter cartridge of the filter screen, its impurities are blocked.
Brand: YOYIK
inquiry
detail
<<
< Previous
21
22
23
24
25
26
Next >
>>
Page 25 / 26
Hit enter to search or ESC to close