-
HSN series three-screw pump
HSN series three-screw pump is kind of displacement type low pressure rotor pump with favorable suction capacity. It is applicable to convey various liquid mediums which have lubricating property and do not contain impurities like solid particles, including fuel oil, hydraulic oil, machine oil, steam turbine oil and heavy oil. Viscosity scope of 3~760 mmP2P/s, conveying pressure ≤4.0Mpa, medium temperature ≤150℃. -
Main sealing oil pump HSND280-46N
Main sealing oil pump HSND280-46N is a vertical installation oil pump with side inlet and side outlet. It is sealed with a skeleton oil seal and is mainly configured in the sealing oil system. After being pressurized by the main sealing oil pump, it is filtered through a filter screen, and then adjusted to a suitable pressure by a differential pressure regulating valve to enter the generator sealing pad. The return oil on the air side enters the air separation box, while the return oil on the hydrogen side enters the sealing oil return box and then flows into the float oil tank, and then relies on the pressure difference to flow into the air separation box. The unit is generally equipped with one for operation and the other for backup, both driven by AC motors. -
DC Vertical lubricating oil pump 125LY-23-4
DC Vertical lubricating oil pump 125LY-23-4 is used to transport turbine oil and various fluid lubricating oils with lubricating functions. It is mainly composed of machine base, bearing chamber, connecting pipe, volute, shaft, impeller, and other components. Before assembling the oil pump, burring and repeatedly clean all parts and components, and confirm that the cleanliness meets the requirements before assembling. It is suitable for supplying normal temperature turbine oil to lubricating systems such as 15-1000MW steam turbine generator units, gas turbine generator units, and power turbines. -
Gear Oil Pump GPA2-16-E-20-R6.3
Gear oil pump GPA2-16-E-20-R6.3 is a common hydraulic pump, which is widely used in the hydraulic system. Its main function is to suck hydraulic oil from the oil tank and deliver pressure to the hydraulic system, so as to realize the power source of the hydraulic system. -
Low resistance anti-corona tape
The low resistance anti-corona tape is a cured material made of alkali free glass cloth impregnated with low resistance anti halo paint after baking treatment. It has the characteristics of uniform resistance value, good elasticity, no scattering of black carbon particles, no pollution of impregnation, etc. The heat resistance grade is F, and it also has the advantages of excellent operation performance and high tensile strength. -
Boiler Tube sliding block
Boiler Tube sliding block, also known as Sliding pair, is composed of two components, which can only move in a certain direction. It has the function of keeping the tube platen flat in the platen superheater and preventing the tube from being out of line and dislocated and the formation of coke residue. The sliding pair is generally made of ZG16Cr20Ni14Si2 material. -
Dual color water level gauge Tempered glass accessories SFD-SW32-(ABC)
The Tempered glass accessories SFD-SW32-(ABC) is used for the SFD-SW32-D dual color water level gauge, consisting of mica sheet, graphite pad, aluminum silicon glass, buffer pad, Monel alloy pad, and protective tape. It has characteristics such as transparency, separability, and elasticity, and does not affect its chemical properties and optical transparency even under rapid changes in temperature and pressure. Therefore, it is a protective lining material for high-pressure steam boiler water level gauges in thermal power plants, refineries, chemical plants, and other industries.
Brand: YOYIK -
Actuator inlet oil filter AP6E602-01D10V/-W
The actuator inlet oil filter AP6E602-01D10V/-W is a high-precision hydraulic oil filter element suitable for filtering the hydraulic oil in the turbine fire resistant oil control system. It is used to filter out impurities that enter the fire resistant oil of the hydraulic engine, including excessive mechanical impurities and oil sludge pollution.
Brand: YOYIK -
EH oil pump discharge filter AP1E101-01D03V/-WF
The EH oil pump discharge filter AP1E101-01D03V/-WF is installed at the outlet of the oil pump in the turbine control oil system to filter impurities in the turbine oil and maintain its cleanliness. The quality of steam turbine oil has many indicators, mainly including viscosity, acid value, acid-base reaction, resistance to emulsification, and flash point. In addition, transparency, freezing point temperature, and mechanical impurities are also criteria for determining oil quality.
Brand: YOYIK -
Gas turbine actuator filter CB13300-001V
The main function of the gas turbine actuator filter CB13300-001V is to remove small particles and impurities in the EH oil system of the gas turbine, protect key components such as the fuel nozzle and combustion chamber from pollutants, and ensure the final purity of the fuel.
Brand: YOYIK -
Steam turbine precision filter MSF-04S-03
The precision filter MSF-04S-03 is specially developed for the turbine EH oil system, which can effectively filter out particulate impurities and colloidal substances in the fire resistant oil, maintain the cleanliness level of EH fire resistant oil, and extend the service life of EH oil.
Brand: YOYIK -
BFP lube filter QF9732W50HPTC-DQ
The BFP lube filter QF9732W50HPTC-DQ is mainly used in the small turbine system of the steam turbine to filter particulate impurities in the lubricating oil to ensure the cleanliness of the system oil and the stability of the small turbine system. The filter element is produced using imported filter materials, which has excellent filtering effect and service life.
Brand: YOYIK
/
