-
Industrial hydraulic oil filter element HC8314FKP39H
The filter element HC8314FKZ39H is used in the hydraulic oil system. Hydraulic oil quality often deteriorates over time due to pollutants such as dirt, sludge, metals, and water. There are many different methods for removing these pollutants, some of which are more effective than others. The commonly used method is to use the oil filter element HC8314FKP39H to filter impurities.
-
Circulating pump return oil filter AD3E301-02D03V/-W
The Circulating pump return oil filter AD3E301-02D03V/-W is installed in the EH oil station for return oil filtration during normal operation of the unit. The filtration accuracy is 0.3 microns, and this high-precision filter element can quickly filter particles in the oil to achieve the cleanliness required for hydraulic equipment.
Brand: YOYIK
-
Actuator EH oil filter with O-ring AP1E102-01D01V/-F
The Actuator EH oil filter with O-ring AP1E102-01D01V/-F for hydraulic servos is widely used in the industry, filtering out particulate impurities in the fluid itself and also filtering out solid substances generated during equipment operation, effectively promoting machine operation. After the installation of filter element AP1E102-01D01V/- F, a sealing test must be conducted. The filter element can be cleaned with a trace amount of detergent and clean water.
Brand: YOYIK
-
Jacking oil pump filter element HBX-250×10
The Jacking oil pump filter element HBX-250x10 at the outlet of the jacking oil pump is made of glass fiber filtering material, which has the advantages of high filtering accuracy, large oil passing capacity, small original pressure loss, and large dirt holding capacity. The HBX-250x10 filter element has good filtering effect and high accuracy, but it is difficult to clean after blockage, and the filter element needs to be directly replaced.
Brand: YOYIK -
BFPT LUBE oil filter element RLFDW/HC1300CAS50V02
The BFPT LUBE oil filter element RLFDW/HC1300CAS50V02 is a lubricating oil filter element that acts on the individual transmission pipeline filter of the lubrication system. It can efficiently block solid impurities generated by mechanical losses mixed in the oil liquid, avoid impurities from flowing with the medium and damaging the components, ensuring the normal operation of the system.
Brand: YOYIK -
Hydraulic oil filter element LX-HXR25X20
The LX-HXR25X20 high-pressure filter element is made of perforated mesh and glass fiber, also known as chemical fiber, with a filtration accuracy of 1-40 μ， When the filter element is contaminated and blocked to a pressure difference of 0.35MPa at the inlet and outlet, a switch signal is issued. At this time, the filter element is replaced to achieve the purpose of protecting system safety.
Brand: YOYIK -
Electrohydraulic converter oil filter element SVA9-N
The oil filter element SVA9-N is installed in the SVA9 type electro-hydraulic converter and is a high-efficiency filter with a filtration accuracy of 40um. Its function is to serve as the last protection for the oil entering the electro-hydraulic converter, to prevent the large particle dirt accidentally leaked by the previous main filter from damaging the electro-hydraulic converter. Therefore, it cannot be used as a substitute for the main filter in the electro-hydraulic governor system and to control the pollution level of the system oil.
Brand: YOYIK -
BFPM hydraulic coupling oil filter DU631.3080.2656.30.EP.FS.9
BFPM hydraulic coupling oil filter DU631.3080.2656.30.EP.FS.9 is a dual cartridge filter element that uses a special metal mesh as the filter material, which is sturdy and has a long service life. Since its launch, it has been continuously recognized and praised by customers. The filter element has the advantages of convenient drainage, large flow area, small pressure loss, simple structure, small volume, light weight, and uniform filtering material.
Brand: YOYIK -
EH oil circulating pump oil filter element HC8904FCP16Z
The EH oil circulating pump oil filter element HC8904FCP16Z is mainly used for filtering oil in the fire resistant oil system, installed in the filter and oil filter in the fire resistant fuel system. Used in the oil circuit of the fire-resistant fuel system to remove metal powder and other mechanical impurities from the worn components of the system, keeping the oil circuit clean and extending the service life of the hydraulic system; The low-pressure series filter element also has a bypass valve. When the filter element is not replaced in a timely manner, the bypass valve can automatically open to ensure the normal operation of the system. -
Hydraulic oil return filter element CRA110CD1
The Hydraulic oil return filter element CRA110CD1 is used for hydraulic oil filtration in hydraulic and lubrication systems. It acts on the fine filter part of the system pipeline, which can efficiently filter out solid impurities caused by mechanical loss mixed in the oil and demulsification, reduce component loss and prevent valves. The core is worn and stuck, which improves the working efficiency of the system and ensures the normal operation of the system. -
EH oil main pump working filter element AP3E301-02D03V/-W
Filter element AP3E301-02D03V/-W is the working filter element at the outlet of the EH oil pump, made of high-quality filter material and carbon steel skeleton. It has advantages such as good breathability and low resistance. When used, it can effectively filter out particulate impurities and colloidal substances in the fire-resistant fuel, maintain the normal operation of the oil pump, and play an important role in the entire system.
Brand: YOYIK
-
Pressure oil-return filter HQ25.600.15Z
The pressure oil-return filter HQ25.600.15Z is a filter element used in the steam turbine system of power plants, mainly used to filter lubricating oil that is recycled in the return oil system. This filter is equipped with a transmitter or bypass valve. When the filter element becomes clogged, the transmitter sends an alarm or the bypass valve opens, allowing the staff to handle it in a timely manner.
Brand: YOYIK
/
