-
Double barrel oil filter disc SPL-32
The Double barrel oil filter disc SPL-32 is installed in a dual barrel mesh oil filter, which is sleeved on the filter cartridge sleeve and is the main filtering element of the filter. It is composed of a filter screen, a support screen, and a corrugated partition plate. The mesh size of the filter screen is selected by the user according to their needs. Each filter element component is composed of a filter cover, filter sleeve, filter disc, and filter disc ring. The top of the filter cover is equipped with a vent valve for discharging air from the inner chamber of the filter.
Brand: YOYIK
-
EH oil main pump discharge filter DP1A601EA01V/-F
EH oil main pump discharge filter DP1A601EA01V/-F is installed in the oil circuit of the fire resistant fuel system to filter metal powder and other mechanical impurities worn by various components in the system, keeping the oil circuit clean and extending the service life of the fire resistant fuel system; The low-pressure series filter element also has a bypass valve. When the filter element is not replaced in a timely manner, the bypass valve can automatically open to ensure the normal operation of the system.
Brand: YOYIK
-
Cellulose filter element LX-DEA16XR-JL
The cellulose filter element LX-DEA16XR-JL is used in the fire resistant oil system of the steam turbine in the power plant. The working principle of the cellulose filter element of the regeneration device of the fire resistant oil system is based on the adsorption and filtration characteristics of the cellulose material. It is usually used in fire-resistant oil systems in aerospace, military, marine and other fields to filter impurities and pollutants in fire-resistant oil, ensure the normal operation of the system and prevent the occurrence of faults and accidents. -
Duplex oil filter DQ150AW25H1.0S
The duplex oil filter DQ150AW25H1.0S is a dual filter element produced by YOYIK. The dual filter refers to two shells equipped with an upper cover and a filter element inside, each with an oil inlet on the upper side wall and an oil outlet on the lower side wall. The oil inlet ports on the two shells are connected by a three-way oil inlet pipe component with an oil inlet switching valve or oil inlet switching valve core, and the oil outlet ports on the two shells are also connected by a three-way oil outlet pipe component with an oil outlet switching valve or oil outlet switching valve core.
Brand: YOYIK -
Actuator Inlet Working Oil Filter DP301EA10V/-W
The DP301EA10V/-W actuator inlet working oil filter of the hydraulic servomotor is used in the fire resistant oil system of the steam turbine generator set to filter out solid particles and colloidal substances in the fire resistant oil, effectively controlling the pollution level of the working medium. The filter element is installed at the inlet of the hydraulic motor to separate impurities such as particles in the fluid, keep the fluid clean, reduce damage to equipment components, and extend the service life of the equipment.
Brand: YOYIK -
Actuator Inlet Flushing Oil Filter DP301EA01V/-F
The characteristics of hydraulic motors are high output, high-speed operation, and small size, which are not possessed by other actuators such as electric motors. Therefore, in the current steam turbine control system, the hydraulic actuator is a unique actuator that drives the regulating valve. The importance of hydraulic engines is self-evident. In order to extend the service life of the hydraulic motor and improve its efficiency, the actuator inlet flushing oil filter DP301EA01V/-F can be used.
Brand: YOYIK -
Jacking Oil Pump Suction Filter QF6803GA20H1.5C
QF6803GA20H1.5C is the inlet filter element of the jacking oil pump, installed at the inlet of the jacking oil pump. Before the oil enters the jacking oil pump, it is filtered to remove impurities and keep the oil clean. This is beneficial for protecting the jacking oil pump from long-term use, reducing maintenance frequency and costs. The lubricating oil entering the jacking oil pump flows out from the oil cooler with an inlet pressure of 0.176 MPa. After filtering impurities through the inlet filter element, it is pressurized by the oil pump. The outlet oil pressure is 16 MPa, flowing to the one-way valve and throttle valve, and finally entering various bearings to ensure smooth operation of the unit. -
EH Oil Main Pump Discharge Oil Filter Element DP1A601EA03V-W
The EH oil main pump discharge oil filter DP1A601EA03V-W is installed at the outlet end of the main oil pump, which can filter out harmful particles and impurities in the EH oil system, keep the oil circuit clean, protect equipment parts, reduce engine damage, avoid blockage of the EH oil system, protect the stable operation of the steam turbine, and improve the operating efficiency of the machine. The filter element is the core component of the filter, made of special materials that are easily damaged and require more maintenance and upkeep during use.
Brand: YOYIK -
EH Oil Circulating Pump Oil Filter Element DR405EA03V-W
The EH oil circulating pump oil filter element DR405EA03V/-W is installed at the outlet of the circulating oil pump. The filter element DR405EA03V/-W can be used to filter out unknown solids (impurities) in the oil, protect the normal operation of the circulating oil pump and its equipment, and greatly reduce the maintenance cost of the equipment. When the filter element DR405EA03V/-W needs to be cleaned, simply remove the filter cartridge, take out the filter element, clean it directly, and then reinstall it, which is very convenient and fast.
Brand: YOYIK -
Lube Oil System Filter Element 2-5685-9158-99
The lube oil system filter element 2-5685-9158-99 is a dual filter element for small machine lubricating oil stations. Its function is to filter out metal powder and other mechanical impurities worn by various components in the lubricating oil, keep the lubricating oil circuit clean, and extend the service life of the lubricating oil system.
Brand: YOYIK -
Industrial filtration Lube oil system Lube filter LY-15/25W
The Lube filter LY-15/25W is installed in the oil filter of the lubricating oil system, and the oil filter is installed at the outlet of the pump, made of stainless steel. The filter element LY-15/25W is used for filtering the lubricating oil of steam turbines and is an effective measure to ensure the quality of lubricating oil. To ensure the operation of the unit, two filters are configured, one for operation and one for backup. -
Hydraulic oil Pump Filter Element SDGLQ-25T-32
Hydraulic oil Pump Filter Element SDGLQ-25T-32 is used in Hydraulic systems to remove contaminants such as dirt, debris, and other impurities from the oil before it is circulated throughout the system. The principle of oil pump filter elements is based on the filtration process, which involves the separation of solid particles from a fluid medium by passing it through a filter medium.
/
