-
EH Oil Circulating Pump Oil Filter Element DR405EA03V-W
The EH oil circulating pump oil filter element DR405EA03V/-W is installed at the outlet of the circulating oil pump. The filter element DR405EA03V/-W can be used to filter out unknown solids (impurities) in the oil, protect the normal operation of the circulating oil pump and its equipment, and greatly reduce the maintenance cost of the equipment. When the filter element DR405EA03V/-W needs to be cleaned, simply remove the filter cartridge, take out the filter element, clean it directly, and then reinstall it, which is very convenient and fast.
Brand: YOYIK -
Lube Oil System Filter Element 2-5685-9158-99
The lube oil system filter element 2-5685-9158-99 is a dual filter element for small machine lubricating oil stations. Its function is to filter out metal powder and other mechanical impurities worn by various components in the lubricating oil, keep the lubricating oil circuit clean, and extend the service life of the lubricating oil system.
Brand: YOYIK -
Industrial filtration Lube oil system Lube filter LY-15/25W
The Lube filter LY-15/25W is installed in the oil filter of the lubricating oil system, and the oil filter is installed at the outlet of the pump, made of stainless steel. The filter element LY-15/25W is used for filtering the lubricating oil of steam turbines and is an effective measure to ensure the quality of lubricating oil. To ensure the operation of the unit, two filters are configured, one for operation and one for backup. -
Hydraulic oil Pump Filter Element SDGLQ-25T-32
Hydraulic oil Pump Filter Element SDGLQ-25T-32 is used in Hydraulic systems to remove contaminants such as dirt, debris, and other impurities from the oil before it is circulated throughout the system. The principle of oil pump filter elements is based on the filtration process, which involves the separation of solid particles from a fluid medium by passing it through a filter medium. -
EH Oil Actuator Filter QTL-6021A
The actuator filter QTL-6021A typically consists of a housing that contains a replaceable filter element. The element is designed to trap particles and debris as the oil passes through it, ensuring that only clean oil is delivered to the actuator. Regular maintenance and replacement of the filter element is necessary to ensure that the steam turbine actuator filter continues to function effectively and protect the turbine from damage. -
Duplex oil filter element LX-FM1623H3XR
Duplex oil filter element LX-FM1623H3XR is a duplex filter element produced by YOYIK. The duplex filter refers to two housings equipped with an upper cover and a filter element inside. The upper side wall of the two housing is provided with an oil inlet and the lower side wall is provided with an oil outlet. The oil inlets on the two housings are connected by a three-way oil inlet pipe assembly with oil inlet switching valve or oil inlet switching valve core, and the oil outlets on the two housings are also connected by a three-way oil outlet pipe assembly with oil outlet switching valve or oil outlet switching valve core. -
Lubricating oil filter element LY-48/25W
The lubricating oil filter element LY-48/25W is installed in the oil filter of the lubricating oil system, and the material is 1Cr18Ni9Ti. The oil filter is installed at the pump outlet to filter the lubricating oil entering the compressor, which is an effective measure to ensure the quality of lubricating oil. In order to ensure the safe operation of the unit, two filters are configured, one for operation and one for standby. -
Jacking Oil Pump Suction Oil Filter DQ6803GA20H1.5C
The jacking oil pump filter element DQ6803GA20H1.5C is used at the oil inlet of the jacking oil pump. As an oil inlet filter element, it can filter out the oil before the pump, remove impurities and solid particles in the oil, and achieve a certain degree of cleanliness. Proper filtering before the pump can effectively prevent damage to the jacking oil pump, ensure smooth operation of the pump, and extend the service life of the oil pump.
Brand: YOYIK -
China manufacturer Honeycomb Filter SS-C05S50N
The honeycomb filter SS-C10S25 is made by winding a single wire back and forth on the support bone using a fiber harness. Because of the structural characteristics of this filter element, it has the characteristics of ideal filtration gradient, inner dense and outer sparse. The space formed by the winding of the wire can accommodate more pollutants, and the filter cartridge has a long lifespan. The material in the wire filter is single without adhesive, ensuring chemical adaptability. At present, line filtration is widely used in the pre filtration of liquids. The high-precision degreased cotton thread filter element is very effective in gas-liquid separation of air.
Brand: YOYIK -
Boiler water cooling wall tube of power plant
The water cooling wall tube is the only heating surface in the evaporation equipment. It is a radiation heat transfer plane composed of continuously arranged tubes. It is close to the furnace wall to form the four walls of the furnace. Some large-capacity boilers arrange part of the water-cooled wall in the middle of the furnace. The two sides absorb the radiant heat of the flue gas respectively, forming the so-called double-sided exposure water wall. The inlet of the water cooling wall pipe is connected by the header, and the outlet can be connected by the header and then connected to the steam drum through the air duct, or it can be directly connected to the steam drum. The inlet and outlet headers of the water wall on each side of the furnace are divided into several, the number of which is determined by the width and depth of the furnace, and each header is connected with the water wall pipes to form a water wall screen. -
YAV-II accumulator Rubber bladder gas charging valve
YAV-II type charging valve is a one-way valve for charging the accumulator with nitrogen. The charging valve charges the accumulator with the aid of a charging tool. After the inflation is completed, it can be closed by itself after removing the inflation tool. This filling valve can also be used for filling of non-corrosive gases. This type of inflatable valve has the characteristics of small volume, high pressure bearing and good self-sealing performance. -
CQJ type accumulator Gas charging tool
CQJ type accumulator Gas charging tool is a matching product for filling nitrogen into NXQ type accumulators. It can be used for charging, discharging, measuring, and correcting the charging pressure of the accumulators. CQJ type accumulator Gas charging tools are also suitable for applications in the fields of metallurgy, electric power, and other industries that require filling high-pressure gas into high-pressure containers. It can be used not only for charging nitrogen into energy accumulators, but also for charging nitrogen into nitrogen springs. It is suitable for charging nitrogen into energy accumulators, gas springs, pressure storage devices, high-voltage switches, electrical products, injection molds, high-pressure containers, fire-fighting equipment, etc. that require nitrogen charging.
Brand: YOYIK
/
