Reverse Rotation Speed Sensor CS-3F

Short Description:

The reverse speed sensor CS-3F can be used to detect the positive and negative rotation, rotational speed, linear speed, etc. of gears, racks and axles. The acceleration of the measured body can also be obtained through calculation and processing. The reverse speed sensor CS-3F has good low frequency and high frequency characteristics, and its low frequency can be as low as 0Hz, which can be used for the zero speed measurement of rotating machinery. Since the sensor can give two speed signals with a certain phase difference, it can be used for positive and negative rotation discrimination. The high frequency can be as high as 20 KHz, which can meet the high speed measurement requirements of most industrial fields.

Send email to us

Product Detail

Technical parameters

The parameters of Speed Sensor CS-3F are as follows:

Working voltage	5 to 24V
Measuring range	0 to 20 KHz
Output signal	square wave, its peak value is equal to the voltage amplitude of the working power supply, independent of the speed, and the maximum output current is 20mA
Speed measuring gear type	any
Thread specification	M16 * 1
Installation clearance	1~5mm
Working temperature	- 10~+100 ℃
BRAND	YOYIK

Working principle

The working principle of rotation Speed Sensor CS-3F varies depending on the type of sensor used. However, the general principle is to measure the rotational speed of the turbine and generate an electrical signal that can be used to control the steam turbine speed.

Rotation Speed Sensor CS-3F uses a magnetic pickup to detect the passage of teeth on a gear or rotor. As the rotor rotates, the teeth pass the magnetic pickup, generating a series of electrical pulses that are proportional to the speed of the rotor. These pulses are then processed by a control system to adjust the turbine speed.

Overall, the working principle of a speed sensor CS-3F involves detecting the rotational speed of the turbine and generating an electrical signal that can be used to control the turbine speed.