I-DC Electric heater control iKhabhinethi DJZ-03

Incazelo emfushane:

I-DJZ-03 Lawula IKhabhinethi ye-DC Electric Heater yakhelwe futhi yakhiqizwa ngokushisa kokushisa kwama-bolts amakhulu ama-turbines steam. Kuma-bolts amakhulu ngaphezulu kwe-56mm ububanzi, umzuzwana wokuthola okudingekayo mkhulu kakhulu ukufeza ngaphansi kwesimo esikhona. Ngenxa yalokho, ukuze uvikele ama-bolts amakhulu, ama-bolts avikelekile esikhathini esithile ngaphansi kwesimo esithile ekuqaleni, khona-ke kufanele anwetshwe ngokushisa, futhi amantongomane ahambelana azovulwa ngobude obuthile be-arc, ama-bolts ekugcineni azotholwa ngokuqina okuthile.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Ikhabethe le-DJZ-03 Lawula iKhabhinethi ye-DC ElectricOkokufudumalisaKusebenza kugesi wezigaba ezi-3, izintambo ezi-4, 380v, 60hz. Idivayisi inemibuthano yokukhipha engu-8 ene-DC 50 ~ 200v eguqukayo Volt (imvamisa isethwe ngo-180 ~ 200v). Kukhona umsebenzi wokushisa njalo umjikelezo ngamunye, isikhathi esilawulayo singasethwa kumahora angama-0 ~ 1 (ngokujwayelekile emizuzwini engama-20 ~ 45). Umjikelezo uzocima ngokuzenzakalelayo futhi akwazi ukulondolozwa kwesikhathi sokugcina umlando isikhathi esilawulwayo ukuze ukugcwala ngokweqile kanye nomonakalo wezingxenye kungagwenywa. Isikhathi singakhombisa inqubo yokushisa. Inkinobho yokumisa isethelwe umjikelezo ngamunye wokushisa, ugesi uzocima ngokushesha lapho kuphuthumayo kwenzeka, kanti eminye imibuthano isasebenza ngokujwayelekile.

Idatha yezobuchwepheshe

Idatha yezobuchwepheshe yekhabethe lokulawula le-DJZ-03:

Ukuthayipha

Amandla aphelele

Umjikelezo wokuphuma

Amandla amakhulu umjikelezo ngamunye

Faka

Amandla kagesi akhiphayo

Temp-

hlasela

Humi-

i-dity

Umsebenzi

DJZ-03

I-56kw

7kw

3-Isigaba, 4-Wire

380v / 60hz

I-50-200V

-Hleleka

-5 ℃ ~

45 ℃

<85%

I-600mw

Qaphela: Sicela uxhumane nathi ngaphambi koku-oda uma kudingeka ukucaciswa okuhlukile.

Izinyathelo zokuzivikela

Izindlela zokuphepha zekhabethe le-DJZ-03 Control:

a. I-Bolt Heater efanele izokhethwa; I-heater izofanisa i-bolt ngokufanele, futhi iqinisekise ukufakwa okuphelele kwe-heater ukuze uthole ukushisa okudingekayo nokushisa okusheshayo, gwema ukulahleka ngokweqile kwesilinda.

b. Hlinzeka ngogesi ku-heater ngemuva kokufaka i-bolt.

c. Ukunakwa okukhethekile kuzokhokhwa okungathathi i-bolt heater lapho ugesi noma, i-heater ayipholile ngisho ukusika ugesi

d. Ugesi kagesi kufanele ahlolwe kusetshenziswa i-500V yokufakelwaumshini. Ukumelana kokufakelwa ngeke kube ngaphansi kwama-500 ω ukuqinisekisa impilo yokusebenza nokuphepha kwe-heater; Ngaphezu kwalokho, faka ugesi nge-heater ku-40 ~ 60v imizuzu engama-20, ufudumele u-heater ukususa umswakama, wandise ukufakwainkani.